Brief introduction of the printing plant commonly used several kinds of puzzles

A lot of people engaged in the printing industry is very understand the puzzle, manual layout in the second procedure.Will not always do work 16 k, 8 k, and so on the number of formal open products, especially the packing box, small CARDS are often not open, and as much as possible in the puzzle of time attention is needed at this time of the opening of the finished product on the right paper range, in order to save costs.Overall puzzle is to some completed a single file on the surface of the Mosaic for computer print process.The next long printing group will introduce you to the common way of puzzle.

1, cross type: commonly known as "copy" and "flip", suitable for print magazines, books and periodicals, such as a magazine of 16 to open cover, front cover, inside front cover, inside back cover, back cover, such as four pages to print, when the idea of the front cover and back cover, inside front cover, inside back cover transverse together, then the front cover and back cover, inside front cover and the inside back cover 'spell in a four pages to print, upon the side printing, the transfer paper transverse 180 degrees, use reverse side to continue printing, is completed, will print cut from the middle, you can get two identical prints.

2, tilting: use the same print on one side of the paper after printing, then turn the paper printed on the back, but another to paper long side as "bite mouth".This method is commonly known as "skip", but now there are very few in this way again.

3, single type: this approach refers to those who only need to print a print below, such as posters, only need to print a positive, but it is not need to be printed on the back.

4, double-sided type, commonly known as "bottom version", refers to the need to be printed on both sides of printed matter, such as small flyer, small posters, CARDS, etc.

Different requirements of printed matter need different ways of puzzle, proper way of puzzle can improve the technological process, save costs and reduce the labor intensity of workers.On the other hand, the wasted effort, pesters.Therefore, each printing industry should brush product to choose suitable way of puzzle.